The Zyxel NR5103 is the high speed 5G Router that is currently being offered by EE as their rebadged home and office 5G router.
As well as providing high speed 5G Internet using the embedded 5GF modem, along with high speed LAN and WiFi, the main advantage of the Zyxel NR5103 router is that is has 4 x external antenna adapters (TS9) which means that you can easily add an outdoor or directional 5G Antenna to help with the 5G signal reception. This external antenna connection is ideal when the router is located indoors where there is a poor signal and there is a much better outdoor signal. A High Gain Outdoor 5G Antenna can be installed and the cables run to the router. Having 4 x TS( connectors on the rear of the router also means that the use of a 4×4 MiMo 5G antenna is viable giving users more flexibility in the choice of external antennas including the use of popular 4×4 MIMO antennas. However, the Zyxel NR5103 5G router still uses TS9 connectors so many external antennas will require TS9 to SMA adapters.
Lightning-fast internet connectivity
The Zyxel NR5103 supports 5G NR DL speeds of 4.67 Gbps* and 4G LTE DL speeds of up to 1.6 Gbps*. Wide-spectrum bandwidth accelerates internet speed and reduces network latency for premium and time-sensitive mobile broadband services.
WiFi 6 (11ax) technology for superior performance and coverage with WiFi 6 and EasyMesh R2 certification
Compliant with the latest WiFi 6 (802.11ax) standard, the Zyxel NR5103 offers speeds of up to 3.6 Gbps with 4×4 UL/DL MU-MIMO. With the uplink MU-MIMO, Orthogonal Frequency Division Multiple Access (OFDMA), and beamforming technologies, the NR5103 delivers premium speed for multi-streaming data access. Along with the WiFi 6 and EasyMesh R2 certification, the NR5103 empowers service providers to deliver an optimal WiFi experience without dead zones.
Strengthen your competitive edge with Fixed Wireless Access (FWA)
Deploying NR5103 as part of FWA allows you to extend your 4G/5G service coverage into subscribers’ homes and workplaces without extra wire infrastructure. This secures the TCOs and increases business revenue by supporting a larger number of subscribers with a premium fixed-grade connection.
SA/NSA dual-mode compliant
The Standalone (SA) and Non-Standalone (NSA) compliant architecture of NR5103 improves your operational efficiency during 5G migration, accelerating your 5G service rollouts.
Remote management and upgrade
Through the 4G/5G radio interface, the NR5103 supports TR-069, and remote GUI to be fully configurable. Firmware Over-The-Air (FOTA) support enables remote firmware upgrades and troubleshooting through events triggered by the operators.
Easy network setup and management with Zyxel Air
The NR5103 comes with a subscriber app – Zyxel Air. The intuitive user interface of Zyxel Air provides your customers with the necessary assistance from device setup to routine management, minimizing service calls while enhancing user satisfaction.
External Antenna Connectors
The Zyxel NR5103 5G router has 4 x TS9 antenna connectors on the rear of the unit allows the connection of a 4×4 MiMo 5G Antenna and the best antenna to connect is the Panorama DWMM4-6-60-5SP which is an omni-directional, outdoor 4×4 MiMo 5G Antenna.
The DWMM4-6-60 Antenna Provides a 4×4 MiMo Solution for Global 4G/5G Networks from 617-6000MHz.
Incorporating four separately fed ultra wideband elements in a single housing the Panorama DWMM4[G] is suitable for a huge range of fixed site and failover applications. The supplied mounting bracket enables simple wall mounting using the supplied screws and wall plugs and mast mounting using the supplied clamps.
The Panorama DWMM4-6-60-5SP 5G antenna can also be mounted with screws directly to non-conductive panels or internal walls or stood on a desk using supplied mounting feet. The omnidirectional radiation pattern allows easy placement of the antenna without requiring directional alignment.
The antenna is fitted with an integrated flame retardant CS32 cable (FR CS29 for GPS/GNSS) which minimises exposed connector joints and simplifies cable management for easy installation. and the model that we stock is the DWMM4-6-60-5SP which is pre-terminated with 4 x 5m long cables with SMA male connectors to screw directly to the majority of our 4×4 MiMo 5G routers such as the Proroute H685 5G Router and the RAPID NR550 5G Router.
|Global Positioning Data
|Peak Gain (dBi)
|Max Input Power (W)
|Frequency Range (MHz)
|617-960 / 1427-6000
|-40° / +85°C ( -40° / 185°F )
|Wall, Mast, Desk Mount
The DWMM4-6-60 antenna provides 4×4 MiMo solution for global 4G/5G networks from 617-6000MHz. Incorporating four separately fed ultra wideband elements in a single housing the DWMM4 is suitable for a huge range of fixed site and failover applications.
The supplied mounting bracket enables simple wall mounting using the supplied screws and wall plugs and mast mounting using the supplied clamps. The antenna can also be mounted with screws directly to non-conductive panels or internal walls or stood on a desk using supplied mounting feet.
The omni-directional radiation pattern allows easy placement of the antenna without requiring directional alignment. The DWMM4G type is supplied with an integrated GPS/GNSS module with 26dB LNA gain and advanced filtering to combat noise.
The antenna is fitted with integrated flame retardant CS32 cable (FR CS29 for GPS/GNSS) which minimises exposed connector joints and simplifies cable management for easy installation.
DWMM4-6-60 – Product Variants
Please note that our standard stock item is the DWMM4-6-60-5SP – please contact us for prices and lead times of other variants.
|FAKRA D Jack
|FAKRA D Jack
|FAKRA C Jack
SKU: DWMM4-6-60-5SP Categories: 4×4 MiMo 5G Antennas, 5G Antennas, Omni-Directional 5G Antennas, Panorama Antennas Tags: 4×4, 4×4 MiMo, 4×4 mimo 5g, 4×4 mimo 5g antenna, 5G antenna, best 5g antenna, DWMM4-6-60, DWMM4-6-60-5SP, high gain outdoor 5g antenna, indoor 5g antenna, mimo 5g antenna, omni directional 5g antenna, outdoor 5G antenna, panorama antenna